AdvantaSil® APHP: High Pressure Silicone Tubing

Product Benefits

  • Eliminates particulate shedding that can occur when cutting braid reinforced hose.
  • Allows for processing at higher flow rates.
  • Full vacuum capabilities on most sizes.
  • Handles short-run peristaltic pump applications requiring 30 psi back pressure.


Technical Data

  • General temperature range: -65°F (-53.9°C) to 400°F (204.4°C).
  • Flexible and translucent.
  • Resists temperature extremes, compression set, chemical attack, ozone, radiation, moisture and environmental exposure.
  • Sterilisable by autoclave or gamma radiation.
  • Documented lot traceable with identification on bags.
  • Available with validated sterility assurance of 10-6 via gamma irradiation per ISO 11137 method VDmax 25.
  • Complete validation package and BPOG test results available upon request.

Important Note:

Specific cutting techniques are strongly recommended for AdvantaSil APHP High-Pressure Silicone Tubing. APHP must be cut with a chevron-style cutter at a 90-degree angle to the tubing, leaving a smooth, non-jagged, perpendicular cut at the tubing end.  See the video above for more information.


AdvantaSil High Pressure is the optimal choice for Single-Use applications such as:

  • TFF
  • Virus Filtration
  • Inline Integrity Testing of Filtration Assemblies
  • High Volume Fluid Transfer

AdvantaSil High Pressure is not intended for implantation or continuous steam applications.

Make An Enquiry

    Information provided on this form will be used for sales follow up and for marketing purposes. You can opt out at any time. Click here to read our privacy policy for full details.


Get in touch with our dedicated team. We are here to help!